 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www.SunLED.com Part Number: ZURMG57W 3.0x2.5mm SURFACE MOUNT LED LAMP Features 3.0mmx2.5mm SMT LED, 1.1mm THICKNESS. BI-COLOR,LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. Operating Characteristics (TA=25C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (VF=0V, f=1MHz) VF VF IR UR (GaAsP/ GaP) 2.0 2.5 10 MG (GaP) 2.2 2.5 10 Unit UR Absolute Maximum Ratings (GaAsP (TA=25C) /GaP) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature VR IF iFS PT TA Tstg 5 30 160 75 MG (GaP) 5 25 140 62.5 V V uA Unit V mA mA mW C P 627 565 nm -40 ~ +85 -40 ~ +85 D 625 568 nm 45 30 nm C 15 15 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 11 11 Wavelength nm P Viewing Angle 2 1/2 ZURMG57W Red Green GaAsP/GaP GaP Water Clear 4 4 627 565 120 Published Date : FEB 25 ,2008 Drawing No : SDSA3800 V5 Checked : B.L.LIU P.1/5 www.SunLED.com Part Number: ZURMG57W 3.0x2.5mm SURFACE MOUNT LED LAMP UR Published Date : FEB 25 ,2008 Drawing No : SDSA3800 V5 Checked : B.L.LIU P.2/5 www.SunLED.com Part Number: ZURMG57W 3.0x2.5mm SURFACE MOUNT LED LAMP MG Published Date : FEB 25 ,2008 Drawing No : SDSA3800 V5 Checked : B.L.LIU P.3/5 www.SunLED.com Part Number: ZURMG57W 3.0x2.5mm SURFACE MOUNT LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 25 ,2008 Drawing No : SDSA3800 V5 Checked : B.L.LIU P.4/5 www.SunLED.com Part Number: ZURMG57W 3.0x2.5mm SURFACE MOUNT LED LAMP PACKING & LABEL SPECIFICATIONS ZURMG57W Published Date : FEB 25 ,2008 Drawing No : SDSA3800 V5 Checked : B.L.LIU P.5/5 |
Price & Availability of ZURMG57W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |